Service Regulator for domestic, commercial or small burners applications 1”x1” NPT or BSP with security shutoff valve incorporated by increase on pressure and partial relief valve built in.

Spring actuated pressure regulator, particularly suitable for systems and combustion racks that require regulated pressure with extremely fast response, even for high flow rate variations. Its outstanding characteristics are:

a) Excellent pressure control;
b) Low lock up pressure;
c) Excellent response time.

Available diameters: 1”, 2” and 3”

Maximum input pressure: 10 bar (g)

Regulating pressures (min/max): 0.02/1.5 bar

Body material: ductile iron

Widely used in chemical and food industries, this model is indicated to guarantee the internal pressure of an inert gas in storage tanks (Blanketing Systems), avoiding contact of the stored product with the atmospheric air. Its outstanding characteristics are:

a) Very Low Pressure Control such as 12 mmWC even with high flow rates;
b) Compact and Single construction; Removable Pilots.
c) Easy Installation.

Available diameters: 1” (NPT thread or Flange), 2” and 3” (Flange)

Maximum input pressure: 7.0 bar

Regulating pressures (min/max): 12 mmwc/220 mmwc

Building materials: carbon steel or ductile iron or stainless steel (other materials under request)

Pressure Regulator widely used in natural gas decompression; from bottles up to 240 bar) Carbon steel body or Stainless Steel body; Trim SS. Inlet ¾”NPT outlet 1”NPT.

Self-operated pressure regulator, widely used in commercial installation, residences, and industrial indoor installations, together with combustion equipment (boilers), ovens, heaters, air conditioning, etc. Its outstanding characteristics are:

a) Versatility;
b) High response speed;
c) Easy maintenance

Available diameters: 1 ½” (NPT thread) and 2” (ANSI 150#RF flange)

Maximum input pressure: 07 bar

Regulating pressures (min/max): 80 mmwc/3150 mmwc

Building materials: Ductile Iron

The Horus model is considered as an Axial Flow Regulator, developed for application in distribution gas systems where high flow and pressure control are fundamental. Its outstanding characteristics are:

a) High flow; high differential pressure and high inlet pressures;
b) Accuracy on pressure control;
c) Manufactured in “fail open” and “fail close” options.

Available diameters: 2”, 3”, 4” and 6” and 8” (150#, 300# and 600# classes)

Maximum input pressure: 100 bar (600# class)

Regulating pressures (min/max): 0,5/52 bar

Material: carbon steel

- HP-25:strong construction with stainless steel membrane, broadly used in test bands of maintenance shops and test calibrations/ are also widely used in high pressure regulator for big ball valves actuators, or in others many systems where the requested pressures are between 2 and 24 bar.

- HP-50/100/200: piston regulators, for applications where are high pressures, between 20 and 200 bar, are demanded downstream, associated to high flows.

Application Examples:
- piping cleaning;
- creation of neutral gas atmospheres;
- tire filling;
- gas propulsion;
- pneumatic actuators;
- static high pressure testing.

Seat diameter 3,2 mm for HP-25 and 2,9 mm for HP-50/100/200

Fittings tapped to the body: 1/4" NPT

Can be supplied clean and degreased for use with oxygen

Simple and tough pressure regulator  spring actuated; with gauge as optional connected to the body. Body made in brass and clean for oxygen or carbon steel body for random applications like GLP; N2; compressed air etc. ¾”x3/4”NPT or 1”x1”NPT.

Pilot-operated pressure regulator, developed for application in gas distribution systems, industrial processes, air separation plants, etc. Its outstanding characteristics are:

a) Roughness Construction
b) pilot and pre pilot guaranteeing the accuracy;
c) manufactured in “fail open” and “fail close” options.

Available diameters: 2”, 3” and 4” (150# and 300# classes)

Maximum input pressure: 50 bar (300# class)

Regulating pressures (min/max): 0.1/40 bar

Body Materials: carbon steel, ductile iron and bronze.

Spring Actuated Pressure Regulator with balanced internals, widely used in LPG, CO2, N2, O2, and other gas facilities. Its outstanding characteristics are:

a) Due to the balanced internals there is variation on outlet pressures even with big variations on the inlet pressure; very often in LPG storage tanks.
b) Versatility;
c) Easy Maintenance.

Available diameters: 1” (NPT thread or ANSI 150# and 300# flange) Proteu 251, 2” (ANSI 150# and 300# flange) Proteu 431

Maximum input pressure: 580 psig

Regulating pressures (min/max): 10-72 psig (Proteu 251), 12-86 psig (Proteu 431), 75-172 psig (Proteu 431 HP)

Building materials: carbon steel, ductile iron, bronze and 316 stainless steel

Field regulator; spring actuated; widely used in hundreds of applications; can come with shutoff valve or relief valve built in. Available in 1”x1” NPT or 2”x2” NPT.

New pilot-operated pressure regulator, Urano can be used with all types of non-corrosive gases or can be used with corrosive gases but when built in special versions. Its outstanding characteristics are:

a) Maintenance without removal body from the line; “top entry”
b) Safety - no gas escape to the atmosphere on both versions FO and FC.
c) c) Lock by a metallic shutter. Available diameters: 1”, 2”, 3”, 4”, 6” and 8” (600# and 900# classes)

Accuracy: + 1%

Control Pressure Range (min/max): 0.7/92 bar

Body Material: carbon steel A 216 grade WCB

Standards: The Urano Regulator are according the following standards ANSI B16.34, B16.104 CL SAW (FCI 70-2), ISA 75-03 and ASME section VIII standards.